USA
CHINA
Applied for high frequency data cable ( such a HDMI, DP, USB3.0，ATA, SATA, SAS), parallel cable(SFP,QSFP) and flat high frequency cable with single/double/tripe layer continuous central taping.
|
Model |
Horizontal single/dual/ triple layer taping machine ( optinal) |
|
Inlet wire (mm) |
φ0.2-φ1.8 |
|
Drain wire (mm) |
φ0.1-φ0.8 |
|
Finished wire(mm) |
φ0.5-φ5 |
|
Tape material |
Aluminum foil tape, cotton paper tape, transparent tape, mica tape, Teflon tape, etc. |
|
Taping RPM |
0-2500 |
|
Machine power |
Speed regulation by 1HP servo motor plus servo controller, taping bobbin is linkage with capstan motor. |
|
Heating box |
Auto flexible type with Omron temperature control, the temperature will controlled within±1°C |
|
Tape bobbin (mm) |
φ100（φ30）X100 |
|
Pay off bobbin(mm) |
φ200-φ400 |
|
Take up bobbin(mm) |
φ300-φ500 |
Adopted magnetic powder clutch and automatic tension trace device, taping tension keep constant from start to end. Don’t use any artificial adjustment.
PLC controlled, setting overlap rate on touched screen, taping point is steady while it’s normal work or accelerating and decelerating.
Take-up traversing is adopted shaft-traversing type structure, traversing distance and traversing width can be set arbitrary.
Smallest angle designed for wire traverse for ensuring the taping pitch won’t be damaged.
Full-automatic computer software control the whole taping line and computer online record and monitor all technical parameters